Make any appliance smart

Don’t replace your old appliances—make them smart with Shelly! Just plug them into Shelly Plug Gen3 to control them remotely or pair with other Shelly devices to create automations. For example, pair it with Shelly H&T Gen3 to automatically turn on your heater when it’s cold, or switch on your fan when it gets too hot. Plus, you can monitor your energy usage and cut down on costs.

Beat the heat during the summer by automating your old fan! It’s very simple with no wiring required – just plug your fan into Shelly Plug S and use Shelly H&T to measure the temperature in the room! This way, when a certain temperature is reached, Shelly H&T can trigger Shelly Plug to turn the fan off, as well as back on! For example, if Shelly H&T measures temperature over 28°C, it can trigger Shelly Plug to automatically turn on the fan. If the temperature falls below 22°C, the fan can be automatically turned back off.

When an electrical appliance is damaged, it doesn’t simply stop working. Usually, it increases the amount of energy used in an attempt to compensate for its operational capacity. Since there is no visible difference in its performance, it might take months before you can identify a problem, leading to inefficiency and wasted energy. Shelly, however, will immediately report the increase in energy consumption and will save you additional expenses on repairs or replacement of equipment.

Shelly Flood sensor can prevent potential threats, including equipment damage by simply placing the smart sensor close to your connected appliances, like dryers, refrigerators, or washing machines. If Shelly Flood detects any leaks, it will immediately trigger Shelly 1PM Gen3 to cut off the power supply of the socket, preventing potential threats.